How To Clean Headphones Like A Pro- Ultimate Guide


Welcome to our comprehensive guide on how to clean your headphones like a pro. At HeadphonePartner, we understand the importance of maintaining your headphones to ensure optimal sound quality and longevity. 

In this article, we will walk you through step-by-step instructions and share expert tips to help you achieve a pristine and hygienic listening experience. Say goodbye to dirt, grime, and bacteria, and say hello to crystal-clear sound!

Why Clean Your Headphones?


Before we dive into the cleaning process, let’s quickly discuss why cleaning your headphones is crucial. Over time, headphones accumulate dust, oils from your skin, and earwax, which can affect both the audio quality and hygiene. 

Regular cleaning not only enhances the lifespan of your headphones but also helps prevent potential ear infections caused by the build-up of bacteria. By following our expert recommendations, you can maintain your headphones in top-notch condition for years to come.

How To Clean Headphones And How Often

There is no hard and fast rule for how often you should clean your headphones. It is depending on how frequently you wear your ear gadget, what you’re doing while wearing it, and where you live. For example, daily-use headphones kept on your desk should be wiped down once a week or so. Gym headphones may need to be cleaned after each use, especially if you sweat a lot.

The best piece of advice is to keep an eye on your belongings. Clean your headphones as soon as you notice earwax, dust, sticky fingerprints, oil, or sweat on them. Putting it off will only result in more gunk and make your job more difficult.

Materials You’ll Need

To begin the cleaning process, gather the following materials:

  • Microfiber cloth
  • Soft-bristle toothbrush
  • Isopropyl alcohol (at least 70% concentration)
  • Cotton swabs
  • Mild soap or headphone cleaning solution
  • Compressed air canister (optional)
  • Toothpicks (optional)
  • A clean, dry cloth for drying

Now that you have everything ready, let’s proceed to the step-by-step cleaning instructions.

Step 1: Removing Earpads and Tips

Before cleaning your headphones, it’s essential to remove the earpads and tips, if applicable. Check the manufacturer’s instructions or user manual for guidance on how to detach them properly. This step allows you to clean these components separately and ensure a thorough cleaning process.

Step 2: Dusting and Wiping

Using a microfiber cloth, gently wipe the exterior surfaces of your headphones to remove any loose debris or dust. Pay close attention to seams, crevices, and areas where dirt tends to accumulate. Avoid using excessive force to prevent any potential damage.

Step 3: Cleaning the Earpads

If your headphones feature detachable earpads, follow these instructions for a meticulous cleaning process:

  • Fill a bowl with warm water and add a small amount of mild soap or a dedicated headphone cleaning solution.
  • Gently agitate the mixture to create a soapy solution.
  • Dip a soft cloth or sponge into the soapy water and wring it out to remove excess moisture.
  • Wipe down the earpads using gentle circular motions, ensuring thorough coverage.
  • If stubborn stains persist, use a soft-bristle toothbrush to lightly scrub the affected areas.
  • Rinse the cloth or sponge and remove any soap residue from the earpads.
  • Wipe the earpads with a clean, dry cloth and leave them to air dry completely.

Step 4: Cleaning the Headphone Cables

To clean the cables of your headphones, follow these simple steps:

  • Dampen a clean microfiber cloth or cotton swab with isopropyl alcohol.
  • Gently wipe the entire length of the cable, removing any dirt or grime.
  • For stubborn stains or residues, moisten a cotton swab with isopropyl alcohol and carefully clean the affected area.
  • Allow the cable to air dry completely before reconnecting it to your headphones.

Step 5: Cleaning the Ear Tips

If your headphones have removable ear tips, here’s how to clean them effectively:

  • Remove the ear tips from your headphones according to the manufacturer’s instructions.
  • Rinse the ear tips under warm running water to remove any debris or earwax.
  • Fill a bowl with warm water and a small amount of mild soap.
  • Place the ear tips in the soapy water and gently agitate them for a few minutes.
  • Rinse the ear tips thoroughly under running water to eliminate any soap residue.
  • Pat dry the ear tips with a clean cloth and leave them to air dry completely.

Step 6: Reassembling Your Headphones

Once all the components are thoroughly dry, carefully reattach the earpads and tips to your headphones according to the manufacturer’s instructions. Ensure that everything is securely in place before moving on to the next step.

Additional Tips and Precautions

  • Avoid using excessive amounts of liquid during the cleaning process to prevent damage to the internal components of your headphones.
  • If your headphones feature a removable headband or other detachable parts, consult the user manual or manufacturer’s website for specific cleaning instructions.
  • If your headphones have a built-in microphone, exercise caution when cleaning around them to avoid any damage.
  • Regularly sanitize your headphones, especially if you share them with others, by using disinfectant wipes or an alcohol-based cleaning solution.
  • Store your headphones in a clean and dry case or pouch when not in use to prevent dust accumulation.


Congratulations! You’ve now mastered the art of cleaning your headphones like a pro. By following the detailed instructions provided in this guide, you can ensure that your headphones remain in optimal condition, providing you with an exceptional audio experience every time you use them. 

Remember to make cleaning your headphones a regular part of your maintenance routine to enjoy years of uninterrupted listening pleasure. Happy cleaning!

We will be happy to hear your thoughts

Leave a reply

Headphone Partner